Ruijie RG-AP810-I Indoor Wi-Fi 6 AP, 1.775 Gbps, 1 GE Ethernet Port

Q1: What is the maximum wireless throughput of the RG‑AP810?

A: The RG‑AP810 supports up to 1.775 Gbps aggregate throughput in HE80 (80 MHz) mode, with 1.2 Gbps on the 5 GHz radio.

Q2: How many users can each AP handle?

A: Each AP810 can support up to 256 clients in total—128 clients per radio (2.4 GHz and 5 GHz) .

Q3: Is this Access Point easy to install?

A: Yes. It offers plug‑and‑play installation with ceiling/wall mounting hardware, supports both PoE (802.3af/at/bt) and optional DC power .

Q4: Can the RG‑AP810 be managed in different modes?

A: Yes. It supports hybrid management: standalone (Fat), controller-based (Fit), or cloud-managed modes. It auto-detects mode without firmware upgrades .

Q5: Does it support advanced Wi‑Fi 6 features like OFDMA and MU‑MIMO?

A: Yes – it fully supports 2x2 MU‑MIMO, OFDMA, BSS coloring, 1024‑QAM, and extra technologies like transmit beamforming and LDPC .

Q6: What security protocols are supported?

A: It supports WPA3 (Personal, Enterprise), WPA2, PPSK, 802.1X, banner captive portals, IPsec VPN (up to 5 tunnels), and features WIDS/rogue AP defense via controller .

Q7: Does it have Bluetooth capabilities?

A: Yes, the AP810-L/I includes Bluetooth 5.1 with an integrated BLE radio .

Q8: What types of ports are available?

A: It has a single gigabit uplink supporting 802.3af/at/bt PoE, plus a console port, reset button, and status LED .

Q9: Does it support WDS or wireless bridge mode?

A: No, indoor models like AP810‑L do not support WDS or bridge mode—this is available only on Ruijie outdoor APs .

Q10: Can these APs mesh with each other without a controller?

A: No, indoor APs (e.g., AP810‑L) do not support mesh mode; mesh requires outdoor or Reyee models .

Q11: What modes can the AP operate in?

A: It supports CAPWAP & DTLS for controller modes, local forwarding, layer‑2 static/routing, and DHCP/DHCP‑snooping/NAT features .

Q12: Is there a firmware upgrade available?

A: Yes—firmware upgrades are available typically via a controller or cloud for new features, modes, and security patches .

Q13: Are PoE and DC power both supported?

A: Yes. Supports IEEE 802.3af/at/bt PoE and 48 V DC input (via optional adapter). DC takes precedence if both are connected .

Q14: What’s the warranty and reliability rating?

A: It includes a 3‑year hardware warranty and MTBF of 200,000 hours .