https://network-switch.com
The Ruijie RG‑S5750 Series, exemplified by the RG‑S5750‑24SFP4XS24DP‑UP, is a cutting-edge 10GE Switch designed for enterprise environments.
Boasting 24 gigabit SFP ports, 4 selectable 1G/10G uplinks, and 24 Power-over-Fiber (PoF) hybrid ports, this model bridges access, aggregation, and PoF-powered deployments with unified management via VSU—making it an ideal Campus Switch, Enterprise Switch, and backbone ethernet switch.
Verified Model Specifications
Using manufacturer data and verified reseller listings:
- Ports: 24 × 1 G SFP downlink ports, 4 × 1G/10G SFP+ uplinks;
- PoF Power: Each hybrid port supports up to 100 W power over fiber, with a total budget of 2,400 W;
- Throughput: 1.28 Tbps switching capacity, 396 Mpps forwarding rate;
- MAC Table: 64K entries; ARP: 24K entries; IPv4: 24K routes; IPv6: 14K routes;
- Redundancy: Triple hot-swappable PSU slots; dual-boot flash backup;
- Cooling & Form: 1RU, 3 fan modules, USB and console management;
- Environment: 0–45 °C operating range;
- Key Features: VSU, IPv4/IPv6 (RIP, OSPF, IS‑IS, BGP), PoF Z‑PoE (non-stop), seguridad avanzada.
Core Features & Differentiators
- Power-over-Fiber (PoF): Hybrid cables deliver both data and power up to 1.5 km—ideal for street lamps, outdoor APs, or remote locations;
- Layer‑3 Intelligence: Advanced routing and multicast protocols support campus and enterprise backbone deployments;
- VSU & Redundancy: Enables high-availability clustering with single-management-plane operation;
- Security & QoS: Supports ACLs, CPP, NFPP, IGMP snooping, and PoE management/priority;
- Robust Design: Dual firmware, hot-plug PSUs/fans, solid-state form factor for 24/7 ops.
Deployment Scenarios
- Outdoor & Street-Level Network Fabric: Hybrid PoF simplifies deployments of remote APs, cameras, and sensors—no AC power needed onsite.
- PoF Campus Corridors: Integrated infrastructure powering ceiling-mounted APs and security devices.
- Aggregation & Backbone Roles: 10G uplinks, advanced routing, and high-throughput capacity suited for mid-core tasks.
- Utility & Infrastructure Access: Managed as part of critical infrastructure with remote power delivery and mesh resiliency.
- Robust & Resilient Edge Connectivity: Z-PoE ensures continuous PD operation even during maintenance or reboots.
Deployment & Management Experience
- Zero-Touch Onboarding via Ruijie INC controller enables rapid deployment and configuration.
- Hardware Resiliency: Dual-boot flash and 1+N PSU ensure high uptime.
- PoF Efficiency: No local power reduces costs and simplifies maintenance.
- Unified CLI/Web Management: VSU supports single-point management across distributed deployments.
- Advanced Monitoring: Syslog, SNMPv3, and INC-integrated alarms simplify network operations.
CLI Configuration Examples
Enable Secure Remote Management
enable
configure terminal
enable service ssh-server
crypto key generate rsa size 2048
enable service web-server
enable service https-server
Set Up VSU for Clustering
vsu enable
vsu domain 5
VLAN and Layer‑3 Routing
vlan 100
interface vlan 100
ip address 10.0.100.1 255.255.255.0
ip route-static 0.0.0.0 0.0.0.0 10.0.0.254
LACP Bonding for 10G Uplinks
interface range tengigabitEthernet1/0/1-2
port-group 1 mode active
PoF Port Setup
interface pojectFiber 0/1
power enable
po https://<fix>rate 80
pof continuity-check enable
Z-PoE Non-Stop Feature
po tower non-stop enable
QoS Traffic Shaping
qos car cir 100000 cbs 128000
interface gigabitEthernet0/10
qos car cir 20000
Conclusion
The Ruijie RG‑S5750‑24SFP4XS24DP‑UP is a true embodiment of a high-end 10GE Switch, bridging power and data with PoF in distributed campus environments.
It presents a versatile solution as a Campus Switch, Enterprise Switch, and ethernet switch for aggregation use cases—offering scalable throughput, advanced routing, robust power control, and simplified management under one platform.
FAQ – Addressing Common Questions
Q1: Can PoF ports deliver 100 W over fiber distance?
Yes—supports up to 100 W per port and is proven to operate over hybrid cabling up to 1.5 km.
Q2: Is non-stop power ensured during firmware updates?
Yes—the Z-PoE feature ensures continuous PD power even during switch reboots .
Q3: Can this serve as a campus aggregation switch?
Absolutely—with 10G uplinks, Layer-3 support, and VSU clustering, it's ideal for campus backbone use.
Q4: What security protections are in place?
Offers ACLs, CPP, NFPP, DHCP/ARP inspection, and various guard mechanisms to secure enterprise deployments.
Q5: Does it support IPv6?
Yes—fully supports IPv4/v6 routing, OSPF/IS‑IS/BGP, multicast, and IPv6-ready access.
Did this article help you or not? Tell us on Facebook and LinkedIn . We’d love to hear from you!
