Proven Expertise, Trusted Solutions
- 8 Years, 100+ Countries
- 10000+ Customers/Projects
- CCIE, CISSP, JNCIE, NSE 7 AWS, Google Cloud Experts
Join Partner Network
- Exclusive Discounts/Service
- Credit Terms/Priority Supply In Hongkong
IE2000-8TC-G-L Switch Overview
The IE-2000-8TC-G-L is a compact Cisco Industrial Switch from the IE2000 Series, offering 8xFE Copper ports and 2xGE Combo ports. Designed for low-cost, low-port applications, it provides four, eight, or 16 10/100Base-T Ethernet ports (with SFP downlinks on selected models). The switch features a dual-input DC power supply, alarm relays, and DIN rail mounting for easy installation. With Industrial PoE support, a conformal coating, and swappable SD flash card and mini-USB connector, it’s perfect for industrial environments. The IE2000-8TC-G-L also supports IEEE-1588-PTPv2 for precise synchronization and is compatible with Ethernet/IP and PROFINET applications. Shop Cisco Switch models like the IE2000-8TC-G-L for flexible, efficient Industrial Ethernet Switches with Lan-Lite features and 2xGE Combo connectivity.
Highlight of IE2000 Series Switches
The Cisco IE 2000 Series are designed for low cost, low ports, and small sizes. They offer:
● Four, eight, or 16 10/100Base-T Ethernet ports (Small Form-Factor Pluggable [SFP] downlinks on selected models); fixed configurations with a compact form factor
● Two gigabit combo ports: SFP (100 Mbps and 1 Gbps) or RJ45 uplink
● Dual-input DC power supply, alarm relays, DIN rail mount
● Industrial Power over Ethernet (PoE) solution
● Conformal coating available
● Swappable SD flash card and mini-USB connector
● Industrial environmental compliance and certifications
● Industrial partner applications: Ethernet/IP and PROFINET
Recommended supported products
Model |
Description |
| SD-IE-1GB | 1GB SD Memory Card |
| GLC-SX-MM-RGD | Cisco GLC-SX-MM-RGD 1000Mbps Multi-Mode Rugged SFP |
| GLC-BX40-U-I |
1000BASE-BX10 SFP module for single-strand SMF, 1310-nm TX/1550-nm RX wavelength, single LC/PC connector |
| GLC-TE | 1000BASE-T SFP transceiver module for Category 5 copper wire |
| GLC-ZX-SM | 1000BASE-ZX SFP |
| GLC-BX-U | 1000BASE-BX SFP, 1310NM |
| SFP-GE-L | 1000BASE-LX/LH SFP (DOM) |
| GLC-ZX-SMD | Cisco GLC-ZX-SMD 1000BASE-ZX SFP transceiver module, SMF, 1550nm, DOM |
| GLC-SX-MMD | Cisco GLC-SX-MMD 1000BASE-SX SFP transceiver module, MMF, 850nm, DOM |
| LIC-IE2000-IP-L | IE2000 LAN Base or Enhanced LAN Base to IPLite e-license |
| STK-RACK-DINRAIL | 19 in. DIN Rail mount kit |
Specification
IE-2000-8TC-G-L Specification |
|
| Total Ports | 10 |
| RJ45 Ports | 8 FE |
| Combo Ports | 2 GE |
| Manufacturing license | LAN Lite |
| Power consumption | 8-port downlink models: 12.5-20 W |
| Hardware | ● 256 MB DRAM with ECC memory ● IEEE 1588v2 FPGA ● 64 MB on-board flash memory ● 1GB removable SD flash memory card (optional) ● Mini-USB connector |
| Alarm | ● Alarm I/O: Two alarm inputs to detect dry contact open or close; one alarm output relay |
| Connectors and cabling | ● 10/100/1000BASE-T ports: RJ-45 connectors, 4-pair Category 5 UTP cabling |
| Layer 2 switching |
IEEE 802.1, 802.3, 802.3at, 802.3af standard (see Table 8), VTPv2, NTP, UDLD, CDP, LLDP, Unicast MAC filter, Resilient Ethernet Protocol (REP), Media Redundancy Protocol (MRP) Ring (IEC 62439-2) |
| Security | SCP, SSH, SNMPv3, TACACS+, RADIUS Server/Client, MAC Address Notification, BPDU Guard, SPAN session |
| Multicast | IGMPv1, v2, v3 Snooping, IGMP filtering, IGMP Querier |
| Management | Fast Boot, Express Setup, Web Device Manager, CNA, Cisco Prime, LMS, MIB, SmartPort, SNMP, syslog |
| Industrial Ethernet | EtherNet/IP, Profinet v2 |
| Layer 2 switching | VTPv3, EtherChannel, Voice VLAN, Flexlink |
| Security |
IPv4 Port-Security, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard, 802.1x, Guest VLAN. MAC Authentication Bypass, 802.1x Multi-Domain Authentication, Storm Control, Trust Boundary, Access-List (ACL) |
| Quality of service | IPv4 Ingress Policing, Rate-Limit, Egress Queuing/Shaping, AutoQoS, PROFINET QoS |
| Management |
Port-Based DHCP, Storm Control - Unicast, Multicast, Broadcast, SPAN Sessions, RSPAN, DHCP Server, Customized TCAM/SDM Size Configuration, Embedded Event Manager (EEM) |
| Industrial Ethernet | IEEE 1588 PTPv2 |
| IPv4 routing | IPv4 static routing |
| IPv6 routing | IPv6 host support, HTTP over IPv6, SNMP over IPv6 |
| Industrial management | Layer 2 switching with 1:1 static Network Address Translation (NAT) |
| IPv4 routing | RIP, OSPF, EIGRP, VRF Lite, PIM for L3 multicast routing including sparse (SM) and dense (DM) mode. |
| IPv6 Routing | IPv6 Static routing, OSPFv3 |
| Security | FIPS 140-2 |
| Embedded Event Manager | EEM feature enabled with IP Lite license |
| DNA Essentials | Additional features |
| Cisco DNA Center | Discovery, topology, inventory, software image management |
| Visibility | DNA assurance, Device 360 |
| Day-zero network bring-up automation | Cisco Network Plug-and-Play application |
Comparison with similar items
Part Number |
IE-2000-8TC-G-L |
IE-2000-8TC-G-E |
| Total Ports | 10 | 10 |
| RJ45 ports | 8 FE | 8 FE |
| Combo Ports | 2 GE | 2 GE |
| Manufacturing license | LAN Lite | LAN Base |
| Type of possible upgrade | 3 | 1, 2, 4 |
Quality Certifications
Get More Information
Warranty
100% Low Price Guarantee
Network-switch.com provides high-quality products at low wholesale prices
100% Quality Assurance
All items are ORIGINAL and GENUINE only.
Item conditions are "New Sealed". They are fully tested by Cisco-certified Engineers.
Free CCIE Technical Support
Our FREE Cisco CCIE Expert Consultancy Support is over the phone, by chat, by email or by login remotely.
100% Money Back Guarantee
You can contact our customer service team to exchange or return any product that you bought from us.
Flexible Secure Payment & Shipment
Verified authorization: Mcafee Secure, VeriSign Secured
Return Material Authorization (RMA) Process
Standard Warranty Policy
Original New Sealed Enterprise Hardware: 3 Years
Original New Sealed Consumer Devices: 1 Year
The Support Contacts
If your Cisco products failed, you must contact your sales representative to verify product failure. If the problem still can't correct by remote support methods i.e. email or phone support, the RMA procedure will issue.