IE-2000-8TC-G-L
保證安全結賬
安全、快速、100% 正品。您值得信賴的 IT 合作夥伴。
最佳價格保證、大量節省、全球信賴。
標籤點
IE2000-8TC-G-L Switch Overview
The IE-2000-8TC-G-L is a compact Cisco Industrial Switch from the IE2000 Series, offering 8xFE Copper ports and 2xGE Combo ports. Designed for low-cost, low-port applications, it provides four, eight, or 16 10/100Base-T Ethernet ports (with SFP downlinks on selected models). The switch features a dual-input DC power supply, alarm relays, and DIN rail mounting for easy installation. With Industrial PoE support, a conformal coating, and swappable SD flash card and mini-USB connector, it’s perfect for industrial environments. The IE2000-8TC-G-L also supports IEEE-1588-PTPv2 for precise synchronization and is compatible with Ethernet/IP and PROFINET applications. Shop Cisco Switch models like the IE2000-8TC-G-L for flexible, efficient Industrial Ethernet Switches with Lan-Lite features and 2xGE Combo connectivity.
Highlight of IE2000 Series Switches
The Cisco IE 2000 Series are designed for low cost, low ports, and small sizes. They offer:
● Four, eight, or 16 10/100Base-T Ethernet ports (Small Form-Factor Pluggable [SFP] downlinks on selected models); fixed configurations with a compact form factor
● Two gigabit combo ports: SFP (100 Mbps and 1 Gbps) or RJ45 uplink
● Dual-input DC power supply, alarm relays, DIN rail mount
● Industrial Power over Ethernet (PoE) solution
● Conformal coating available
● Swappable SD flash card and mini-USB connector
● Industrial environmental compliance and certifications
● Industrial partner applications: Ethernet/IP and PROFINET
Recommended supported products
Model |
Description |
| SD-IE-1GB | 1GB SD Memory Card |
| GLC-SX-MM-RGD | Cisco GLC-SX-MM-RGD 1000Mbps Multi-Mode Rugged SFP |
| GLC-BX40-U-I |
1000BASE-BX10 SFP module for single-strand SMF, 1310-nm TX/1550-nm RX wavelength, single LC/PC connector |
| GLC-TE | 1000BASE-T SFP transceiver module for Category 5 copper wire |
| GLC-ZX-SM | 1000BASE-ZX SFP |
| GLC-BX-U | 1000BASE-BX SFP, 1310NM |
| SFP-GE-L | 1000BASE-LX/LH SFP (DOM) |
| GLC-ZX-SMD | Cisco GLC-ZX-SMD 1000BASE-ZX SFP transceiver module, SMF, 1550nm, DOM |
| GLC-SX-MMD | Cisco GLC-SX-MMD 1000BASE-SX SFP transceiver module, MMF, 850nm, DOM |
| LIC-IE2000-IP-L | IE2000 LAN Base or Enhanced LAN Base to IPLite e-license |
| STK-RACK-DINRAIL | 19 in. DIN Rail mount kit |
Specification
IE-2000-8TC-G-L Specification |
|
| Total Ports | 10 |
| RJ45 Ports | 8 FE |
| Combo Ports | 2 GE |
| Manufacturing license | LAN Lite |
| Power consumption | 8-port downlink models: 12.5-20 W |
| Hardware | ● 256 MB DRAM with ECC memory ● IEEE 1588v2 FPGA ● 64 MB on-board flash memory ● 1GB removable SD flash memory card (optional) ● Mini-USB connector |
| Alarm | ● Alarm I/O: Two alarm inputs to detect dry contact open or close; one alarm output relay |
| Connectors and cabling | ● 10/100/1000BASE-T ports: RJ-45 connectors, 4-pair Category 5 UTP cabling |
| Layer 2 switching |
IEEE 802.1, 802.3, 802.3at, 802.3af standard (see Table 8), VTPv2, NTP, UDLD, CDP, LLDP, Unicast MAC filter, Resilient Ethernet Protocol (REP), Media Redundancy Protocol (MRP) Ring (IEC 62439-2) |
| Security | SCP, SSH, SNMPv3, TACACS+, RADIUS Server/Client, MAC Address Notification, BPDU Guard, SPAN session |
| Multicast | IGMPv1, v2, v3 Snooping, IGMP filtering, IGMP Querier |
| Management | Fast Boot, Express Setup, Web Device Manager, CNA, Cisco Prime, LMS, MIB, SmartPort, SNMP, syslog |
| Industrial Ethernet | EtherNet/IP, Profinet v2 |
| Layer 2 switching | VTPv3, EtherChannel, Voice VLAN, Flexlink |
| Security |
IPv4 Port-Security, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard, 802.1x, Guest VLAN. MAC Authentication Bypass, 802.1x Multi-Domain Authentication, Storm Control, Trust Boundary, Access-List (ACL) |
| Quality of service | IPv4 Ingress Policing, Rate-Limit, Egress Queuing/Shaping, AutoQoS, PROFINET QoS |
| Management |
Port-Based DHCP, Storm Control - Unicast, Multicast, Broadcast, SPAN Sessions, RSPAN, DHCP Server, Customized TCAM/SDM Size Configuration, Embedded Event Manager (EEM) |
| Industrial Ethernet | IEEE 1588 PTPv2 |
| IPv4 routing | IPv4 static routing |
| IPv6 routing | IPv6 host support, HTTP over IPv6, SNMP over IPv6 |
| Industrial management | Layer 2 switching with 1:1 static Network Address Translation (NAT) |
| IPv4 routing | RIP, OSPF, EIGRP, VRF Lite, PIM for L3 multicast routing including sparse (SM) and dense (DM) mode. |
| IPv6 Routing | IPv6 Static routing, OSPFv3 |
| Security | FIPS 140-2 |
| Embedded Event Manager | EEM feature enabled with IP Lite license |
| DNA Essentials | Additional features |
| Cisco DNA Center | Discovery, topology, inventory, software image management |
| Visibility | DNA assurance, Device 360 |
| Day-zero network bring-up automation | Cisco Network Plug-and-Play application |
Comparison with similar items
Part Number |
IE-2000-8TC-G-L |
IE-2000-8TC-G-E |
| Total Ports | 10 | 10 |
| RJ45 ports | 8 FE | 8 FE |
| Combo Ports | 2 GE | 2 GE |
| Manufacturing license | LAN Lite | LAN Base |
| Type of possible upgrade | 3 | 1, 2, 4 |
Quality Certifications
Get More Information
Warranty
100% Low Price Guarantee
Network-switch.com provides high-quality products at low wholesale prices
100% Quality Assurance
All items are ORIGINAL and GENUINE only.
Item conditions are "New Sealed". They are fully tested by Cisco-certified Engineers.
Free CCIE Technical Support
Our FREE Cisco CCIE Expert Consultancy Support is over the phone, by chat, by email or by login remotely.
100% Money Back Guarantee
You can contact our customer service team to exchange or return any product that you bought from us.
Flexible Secure Payment & Shipment
Verified authorization: Mcafee Secure, VeriSign Secured
Return Material Authorization (RMA) Process
Standard Warranty Policy
Original New Sealed Enterprise Hardware: 3 Years
Original New Sealed Consumer Devices: 1 Year
The Support Contacts
If your Cisco products failed, you must contact your sales representative to verify product failure. If the problem still can't correct by remote support methods i.e. email or phone support, the RMA procedure will issue.
退款政策
在 Network-switch.com我們致力於提供最佳的客戶體驗，確保您的購買符合您的期望。如果您因任何原因對購買的商品不滿意，請閱讀下方的退貨和退款政策，以了解您的選擇。
退貨
您有權退回從 Network-switch.com 在下列條件下：
- 退貨資格： 商品可於以下期限內退貨 30天 自交貨之日起，只要產品保持原始狀態、未使用且原包裝中。
- 不可退貨的商品： 某些商品（例如個人化或客製化產品）以及購買時標示為不可退貨的商品）無法退貨。
- 退貨流程： 如需退貨，請聯絡我們的客戶支援團隊 help@network-switch.com。我們將向您提供如何退回產品以及在必要時取得退貨授權號的說明。
退款
- 退款流程： 一旦我們收到您退回的商品並進行檢查，我們將在以下期限內按照原付款方式處理您的退款： 7個工作天。
- 退款條件： 退款將以商品購買價格計算，不包括任何運費、手續費或其他額外費用。如果退回的商品有損壞、使用過或缺少零件，我們可能會部分退款。
交流
如果您想更換不同尺寸、顏色或型號的商品，請遵循相同的退貨流程。收到退回的商品後，我們將根據庫存情況免費寄送替換商品。
運費
- 退貨運費： 除非物品有瑕疵、損壞或不正確，否則您有責任支付退貨運費。
- 運費退款： 運費不予退還，除非商品有瑕疵或不正確。
- 補貨費： 退回商品時將被收取約 30% 的產品價格，除非商品有瑕疵、損壞或不正確。
損壞或錯誤的物品
如果您收到損壞或錯誤的商品，請在規定時間內聯絡我們的客戶服務團隊 7天 收到產品後，我們將立即進行更換。
聯繫我們
如果您對退貨或退款有任何疑問或擔憂，請與我們聯絡：
電子郵件： help@network-switch.com
在退回任何產品之前，請聯絡我們，說明您遇到的問題。很多情況下，我們可以透過技術支援解決問題，您無需退回產品。
如果設備有無法修復的缺陷，您可以根據我們十二個月的保固期將其退還給我們進行維修或更換。只需聯絡我們，我們將為您提供退貨代碼、退貨地址以及其他說明。
請勿在未聯絡我們的情況下退貨。我們將引導您完成退貨流程，包括合適的配送方式。