AIR-SAP2602E-X-K9
保證安全結賬
安全、快速、100% 正品。您值得信賴的 IT 合作夥伴。
最佳價格保證、大量節省、全球信賴。
標籤點
Aironet SAP2602E-X-K9 Access Point Overview
The Cisco AIR-SAP2602E-X-K9 is a standalone wireless access point from the Cisco Aironet 2600 Series, designed as a cost-effective entry-level solution without the need for a wireless controller. It supports 3x4 MIMO technology with three spatial streams, delivering up to 450 Mbps for optimal coverage and performance. This dual-band access point operates on IEEE 802.11 a/b/g/n standards, with internal antennas and selectable regulatory domains. The standalone model offers flexibility, as it can be upgraded or downgraded to a controller-based access point by adjusting the system IOS. This allows for adding advanced services such as voice, location services, guest access, and advanced security over time. Shop Cisco Wireless APs like the Air-SAP2602E-X-K9 for reliable, high-performance wireless solutions.
Specifications
AIR-SAP2602E-X-K9 Specifications |
||||||||
| Software | Cisco Unified Wireless Network Software Release 7.2.110 or later. | |||||||
| Supported Wireless LAN Controllers |
● Cisco 2500 Series, Cisco Wireless LAN Controller Module (WLCM) on Cisco Services Ready Engine (SRE) for Integrated Services Router Generation 2 (ISR G2), Cisco Wireless Services Module 2 (WiSM2), Cisco 5500 Series, Cisco Flex 7500 Series |
|||||||
|
802.11n Version 2.0 (and Related) Capabilities |
● 3x4 multiple-input multiple-output (MIMO) with three spatial streams ● Maximal ratio combining (MRC)● 802.11n and 802.11a/g beamforming ● 20- and 40-MHz channels ● PHY data rates up to 450 Mbps (40-MHz with 5 GHz) ● Packet aggregation: Aggregated MAC Protocol Data Unit (A-MPDU) (Tx/Rx), Aggregated MAC Protocol Service Unit (A-MSDU) (Tx/Rx) ● 802.11 dynamic frequency selection (DFS) ● Cyclic shift diversity (CSD) support |
|||||||
| Data Rates Supported | 802.11a: 6, 9, 12, 18, 24, 36, 48, and 54 Mbps | |||||||
| 802.11bg: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps | ||||||||
|
Maximum Number of Nonoverlapping Channels |
2.4 GHz ● 802.11b/g: ◦ 20 MHz: 3 ● 802.11n: ◦ 20 MHz: 3 |
5 GHz ● 802.11a: ◦ 20 MHz: 21 ● 802.11n: ◦ 20 MHz: 21 ◦ 40 MHz: 9 |
||||||
| Maximum Transmit Power | 2.4 GHz ● 802.11b ◦ 22 dBm: 3 Antennas ● 802.11g ◦ 22 dBm: 3 Antennas ● 802.11n (HT20) ◦ 22 dBm: 3 Antennas |
5 GHz ● 802.11a ◦ 23 dBm: 4 Antennas ● 802.11n (HT20) ◦ 23 dBm: 4 Antennas ● 802.11n (HT40) ◦ 23 dBm: 4 Antennas |
||||||
| Available Transmit Power Settings | 2.4 GHz ● 22 dBm (160 mW) ● 19 dBm (80 mW) ● 16 dBm (40 mW) ● 13 dBm (20 mW) ● 10 dBm (10 mW) ● 7 dBm (5 mW) ● 4 dBm (2.5 mW) |
5 GHz ● 23 dBm (200 mW) ● 20 dBm (100 mW) ● 17 dBm (50 mW) ● 14 dBm (25 mW) ● 11 dBm (12.5 mW) ● 8 dBm (6.25 mW) ● 5 dBm (3.13 mW) |
||||||
| Integrated Antenna | ● 2.4 GHz, Gain 4 dBi, internal omnidirectional, horizontal beamwidth 360° ● 5 GHz, Gain 4 dBi, internal omnidirectional, horizontal beamwidth 360° |
|||||||
| External Antenna (Sold Separately) | ● Certified for use with antenna gains up to 6 dBi (2.4 GHz and 5 GHz) ● Cisco offers the industry's broadest selection of 802.11n antennas delivering optimal coverage for a variety of deployment scenarios |
|||||||
| Interfaces | ● 10/100/1000BASE-T autosensing (RJ-45) ● Management console port (RJ-45) |
|||||||
| Indicators | ● Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors |
|||||||
|
Dimensions (W x L x H) |
● Access point (without mounting bracket): 8.69x8.69x2.11in. (22.1x22.1x5.4) |
|||||||
| Weight | ● 2.3 lbs (1.04 kg) (2.7 lbs for external) | |||||||
| Environmental | Cisco Aironet 2600i ● Nonoperating (storage) temperature: -22 to 158°F (-30 to 70°C) ● Nonoperating (storage) Altitude Test 25˚C, 15,000 ft. ● Operating temperature: 32 to 104°F (0 to 40°C) ● Operating humidity: 10 to 90% percent (noncondensing) ● Operating Altitude Test: 40˚C, 9843 ft.Cisco Aironet 2600e ● Nonoperating (storage) temperature: -22 to 158°F (-30 to 70°C) ● Nonoperating (storage) Altitude Test: 25˚C, 15,000 ft. ● Operating temperature: -4 to 131°F (-20 to 55°C) ● Operating humidity: 10 to 90 % (noncondensing) ● Operating Altitude Test: 40˚C, 9843 ft. |
|||||||
| System Memory | ● 256 MB DRAM ● 32 MB flash |
|||||||
| Input Power Requirements | ● AP2600: 44 to 57 VDC ● Power Supply and Power Injector: 100 to 240 VAC; 50 to 60 Hz |
|||||||
| Powering Options | ● 802.3af Ethernet Switch ● Cisco AP2600 Power Injectors (AIR-PWRINJ4=) ● Cisco AP2600 Local Power Supply (AIR-PWR-B=) |
|||||||
| Power Draw | ● AP2600: 12.95WNote: When deployed using Power over Ethernet (PoE), the power drawn from the power sourcing equipment will be higher by some amount depending on the length of the interconnecting cable. This additional power may be as high as 2.45W, bringing the total system power draw (access point + cabling) to 15.4W. |
|||||||
| Warranty | Limited Lifetime Hardware Warranty | |||||||
Quality Certifications
Get More Information
Warranty
100% Low Price Guarantee
Network-switch.com provides high-quality products at low wholesale prices
100% Quality Assurance
All items are ORIGINAL and GENUINE only.
Item conditions are "New Sealed". They are fully tested by Cisco-certified Engineers.
Free CCIE Technical Support
Our FREE Cisco CCIE Expert Consultancy Support is over the phone, by chat, by email or by login remotely.
100% Money Back Guarantee
You can contact our customer service team to exchange or return any product that you bought from us.
Flexible Secure Payment & Shipment
Verified authorization: Mcafee Secure, VeriSign Secured
退款政策
在 Network-switch.com我們致力於提供最佳的客戶體驗，確保您的購買符合您的期望。如果您因任何原因對購買的商品不滿意，請閱讀下方的退貨和退款政策，以了解您的選擇。
退貨
您有權退回從 Network-switch.com 在下列條件下：
- 退貨資格： 商品可於以下期限內退貨 30天 自交貨之日起，只要產品保持原始狀態、未使用且原包裝中。
- 不可退貨的商品： 某些商品（例如個人化或客製化產品）以及購買時標示為不可退貨的商品）無法退貨。
- 退貨流程： 如需退貨，請聯絡我們的客戶支援團隊 help@network-switch.com。我們將向您提供如何退回產品以及在必要時取得退貨授權號的說明。
退款
- 退款流程： 一旦我們收到您退回的商品並進行檢查，我們將在以下期限內按照原付款方式處理您的退款： 7個工作天。
- 退款條件： 退款將以商品購買價格計算，不包括任何運費、手續費或其他額外費用。如果退回的商品有損壞、使用過或缺少零件，我們可能會部分退款。
交流
如果您想更換不同尺寸、顏色或型號的商品，請遵循相同的退貨流程。收到退回的商品後，我們將根據庫存情況免費寄送替換商品。
運費
- 退貨運費： 除非物品有瑕疵、損壞或不正確，否則您有責任支付退貨運費。
- 運費退款： 運費不予退還，除非商品有瑕疵或不正確。
- 補貨費： 退回商品時將被收取約 30% 的產品價格，除非商品有瑕疵、損壞或不正確。
損壞或錯誤的物品
如果您收到損壞或錯誤的商品，請在規定時間內聯絡我們的客戶服務團隊 7天 收到產品後，我們將立即進行更換。
聯繫我們
如果您對退貨或退款有任何疑問或擔憂，請與我們聯絡：
電子郵件： help@network-switch.com
在退回任何產品之前，請聯絡我們，說明您遇到的問題。很多情況下，我們可以透過技術支援解決問題，您無需退回產品。
如果設備有無法修復的缺陷，您可以根據我們十二個月的保固期將其退還給我們進行維修或更換。只需聯絡我們，我們將為您提供退貨代碼、退貨地址以及其他說明。
請勿在未聯絡我們的情況下退貨。我們將引導您完成退貨流程，包括合適的配送方式。