AIR-AP1852E-X-K9
保證安全結賬
安全、快速、100% 正品。您值得信賴的 IT 合作夥伴。
最佳價格保證、大量節省、全球信賴。
標籤點
Aironet 1852E-X-K9 Access Point Overview
The Cisco AIR-AP1852E-X-K9 is part of the Cisco Aironet 1850 Series Access Points, designed for small and medium-sized networks. This access point supports 802.11ac Wave 2, offering 4x4 MIMO with four spatial streams for single-user MIMO and three spatial streams for multiuser MIMO. With external antennas, it delivers PHY data rates up to 1.7 Gbps. It's ideal for businesses with high-performance Wi-Fi needs. Shop Cisco Wireless APs including AIR-AP1852E-X-K9 for advanced, enterprise-class networking.
Specifications
AIR-AP1852E-X-K9 Specification |
|
| Software | Cisco Unified Wireless Network Software Release with AireOS wireless controllers:8.1 MR1 or later for the Cisco Aironet 1850 Series Access Points |
| Deployment modes | Centralized local, Standalone, Sniffer, Cisco FlexConnect™, Monitor, OfficeExtend, Mesh |
| Supported wireless LAN controllers | Cisco 2500 Series Wireless Controllers, Cisco Wireless Controller Module for ISR G2, Cisco Wireless Services Module 2 (WiSM2) for Catalyst®6500 Series Switches, Cisco 5500 Series Wireless Controllers, Cisco Flex® 7500 Series Wireless Controllers, Cisco 8500 Series Wireless Controllers, Cisco 5760 Series Wireless Controllers, Cisco Catalyst 3650/3850 Series switch with integrated controllerCisco Mobility Express |
|
802.11n version 2.0 (and related) capabilities |
4x4 MIMO with four spatial streams Maximal ratio combining (MRC)20- and 40-MHz channels PHY data rates up to 600 Mbps (40 MHz with 5 GHz) Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) 802.11 dynamic frequency selection (DFS) Cyclic shift diversity (CSD) support |
| 802.11ac Wave 1 and 2 capabilities | 4x4 MIMO with four spatial streams, single-user MIMO4x4 MIMO with three spatial streams, multiuser MIMO MRC802.11ac beamforming (transmit beamforming) 20-, 40-, and 80-MHz channels PHY data rates up to 1.7 Gbps (80 MHz in 5 GHz) Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) 802.11 DFSCSD support Rogue device detection |
| Integrated antenna | 2.4 GHz, gain 3 dBi, internal omni, horizontal beamwidth 360° 5 GHz, gain 5 dBi, internal omni, horizontal beamwidth 360° |
| External antenna (sold separately) | Certified for use with antenna gains up to 6 dBi (2.4 GHz and 5 GHz) Cisco offers the industry's broadest selection ofantennas, delivering optimal coverage for a variety of deployment scenarios |
| Interfaces | 1 x 10/100/1000 BASE-T autosensing (RJ-45), Power over Ethernet (PoE) 1 x 10/100/1000 BASE-T autosensing (RJ-45), AUX (used for Link Aggregation) Management console port (RJ-45) USB 2.0 (enabled via future software) |
| Indicators | Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors |
| Dimensions(W x L x H) | Access point (without mounting bracket): 8.3 x 8.3 x 2 in. (210.8 x 210.8 x 50.8 mm) |
| Weight | 3.12 lb (1.41 kg) |
| Environmental | Cisco Aironet 1850i Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) Nonoperating (storage) altitude test: 25˚C, 15,000 ft. Operating temperature: 32° to 104°F (0° to 40°C) Operating humidity: 10% to 90% (noncondensing) Operating altitude test: 40˚C, 9843 ft. Cisco Aironet 1850e Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) Nonoperating (storage) altitude test: 25˚C, 15,000 ft. Operating temperature: -4° to 122°F (-20° to 50°C) Operating humidity: 10% to 90% (noncondensing) Operating altitude test: 40˚C, 9843 ft. |
| System memory | 1 GB DRAM 256 MB flash |
| Input power requirements | AP1850: 44 to 57 VDC Power supply and power injector: 100 to 240 VAC; 50 to 60 Hz |
| Power draw | 20.9W Note: When deployed using a Power over Ethernet (PoE) specification, the power drawn from the power sourcing equipment will be higher by some amount, depending on the length of the interconnecting cable. |
| Powering options | 802.3at Enhanced PoE Cisco power injector, AIR-PWRINJ4= Cisco local power supply, AIR-PWR-C= Cisco power injector, AIR-PWRINJ5= (Note:this injector supports 802.3af only) 802.3af Note: If 802.3af PoE is the source of power, (1) the 1852e 2.4-GHz radio will shift to 2x3 from 3x4, (2) The USB port and AUX Ethernet port are disabled on both the 1852i and 1852e. |
| Warranty | Limited lifetime hardware warranty |
Quality Certifications
Get More Information
Warranty
100% Low Price Guarantee
Network-switch.com provides high-quality products at low wholesale prices
100% Quality Assurance
All items are ORIGINAL and GENUINE only.
Item conditions are "New Sealed". They are fully tested by Cisco-certified Engineers.
Free CCIE Technical Support
Our FREE Cisco CCIE Expert Consultancy Support is over the phone, by chat, by email or by login remotely.
100% Money Back Guarantee
You can contact our customer service team to exchange or return any product that you bought from us.
Flexible Secure Payment & Shipment
Verified authorization: Mcafee Secure, VeriSign Secured
退款政策
在 Network-switch.com我們致力於提供最佳的客戶體驗，確保您的購買符合您的期望。如果您因任何原因對購買的商品不滿意，請閱讀下方的退貨和退款政策，以了解您的選擇。
退貨
您有權退回從 Network-switch.com 在下列條件下：
- 退貨資格： 商品可於以下期限內退貨 30天 自交貨之日起，只要產品保持原始狀態、未使用且原包裝中。
- 不可退貨的商品： 某些商品（例如個人化或客製化產品）以及購買時標示為不可退貨的商品）無法退貨。
- 退貨流程： 如需退貨，請聯絡我們的客戶支援團隊 help@network-switch.com。我們將向您提供如何退回產品以及在必要時取得退貨授權號的說明。
退款
- 退款流程： 一旦我們收到您退回的商品並進行檢查，我們將在以下期限內按照原付款方式處理您的退款： 7個工作天。
- 退款條件： 退款將以商品購買價格計算，不包括任何運費、手續費或其他額外費用。如果退回的商品有損壞、使用過或缺少零件，我們可能會部分退款。
交流
如果您想更換不同尺寸、顏色或型號的商品，請遵循相同的退貨流程。收到退回的商品後，我們將根據庫存情況免費寄送替換商品。
運費
- 退貨運費： 除非物品有瑕疵、損壞或不正確，否則您有責任支付退貨運費。
- 運費退款： 運費不予退還，除非商品有瑕疵或不正確。
- 補貨費： 退回商品時將被收取約 30% 的產品價格，除非商品有瑕疵、損壞或不正確。
損壞或錯誤的物品
如果您收到損壞或錯誤的商品，請在規定時間內聯絡我們的客戶服務團隊 7天 收到產品後，我們將立即進行更換。
聯繫我們
如果您對退貨或退款有任何疑問或擔憂，請與我們聯絡：
電子郵件： help@network-switch.com
在退回任何產品之前，請聯絡我們，說明您遇到的問題。很多情況下，我們可以透過技術支援解決問題，您無需退回產品。
如果設備有無法修復的缺陷，您可以根據我們十二個月的保固期將其退還給我們進行維修或更換。只需聯絡我們，我們將為您提供退貨代碼、退貨地址以及其他說明。
請勿在未聯絡我們的情況下退貨。我們將引導您完成退貨流程，包括合適的配送方式。