Cisco Catalyst 9200-24P-A 24-Port PoE+ Switch, Advantage License
保證安全結賬
安全、快速、100% 正品。您值得信賴的 IT 合作夥伴。
最佳價格保證、大量節省、全球信賴。
標籤點
Cisco Catalyst 9200-24P-A Access Enterprise Switch
The Cisco Catalyst 9200-24P-A is a 1 RU, 24-port PoE+ access switch designed for U.S. campus and branch networks—from powering IP cameras in Los Angeles distribution hubs to driving Wi-Fi 6 access points in Manhattan office towers.
Running Cisco IOS XE with the Network Advantage license on an x86 CPU and UADP 2.0 ASIC, it offers 24 auto-sensing 10/100/1000 RJ-45 PoE+ downlinks and a hot-swappable modular uplink slot for seamless 1 GbE, 10 GbE, or 40 GbE uplinks.
Field-replaceable fans and a redundant power-supply option ensure “always-on” resiliency. Centralized management is available via Cisco Catalyst Center or Meraki Dashboard.
Overview
Highlights
-
24 × 10/100/1000 PoE+ Downlinks
Auto-sensing ports deliver up to 30 W each for IP phones, cameras, and APs; dynamic PoE+ power allocation scales to a maximum of 1 440 W across both power supplies -
Robust PoE Power Budget
Primary PWR-C6-600WAC supplies 370 W PoE+; adding a second PWR-C6-600WAC doubles budget to 740 W -
Wire-Speed Switching
128 Gbps non-blocking switching capacity and 95.23 Mpps forwarding performance at 64-byte packets; stacked, scales to 288 Gbps and 214 Mpps -
StackWise-160 Resiliency
Stack up to eight switches with 160 Gbps bidirectional stacking bandwidth, NSF/SSO, and cross-stack EtherChannel for sub-50 ms failover -
Modular Uplink Flexibility
One hot-swappable slot supports C9200-NM-4G (4×1 GbE), C9200-NM-8X (8×10 GbE), or C9200-NM-2Q (2×40 GbE) modules -
Enterprise-Grade Security
AES-128 MACsec, Secure Boot with Trust Anchor Module, 802.1X authentication, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard, and scalable ACLs -
Energy-Efficient & Always-On Design
IEEE 802.3az Energy-Efficient Ethernet, hot-swap fans, FRU power-supply support, and PoE “Fast PoE” to power devices immediately after reboot -
Advanced Programmability & Telemetry
Open APIs (NETCONF/RESTCONF, gNMI, NX-API/Python), on-box scripting, and streaming telemetry integrate with Cisco DNA Center or Meraki Dashboard
Recommended Accessories
| Accessory | Category | Description |
|---|---|---|
| C9200-NM-4G | Network Module | 4×1 GbE SFP uplink module |
| C9200-NM-8X | Network Module | 8×10 GbE SFP+ uplink module |
| C9200-NM-2Q | Network Module | 2×40 GbE QSFP+ uplink module |
| PWR-C6-600WAC | Power Supply | 600 W AC FRU power supply (370 W PoE+) |
| PWR-C6-600WAC (2) | Power Supply | Secondary 600 W AC PSU for 740 W PoE+ |
| FAN-T2= | Fan Module | Field-replaceable fan tray for N+1 cooling redundancy |
| C9200-STACK-KIT= | Stacking Hardware | StackWise-160 kit (adapters + cable) |
| STACK-T4-50CM | Stacking Cable | 50 cm Type 3 stacking cable (160 Gbps) |
Comparison with Similar Models
| Feature | C9200-24P-A (Advantage) | C9200-24P-E (Essentials) |
C9200-24T-A Advantage |
|---|---|---|---|
| Downlinks & Uplinks | 24×PoE+ + modular slot | 24×PoE+ + modular slot | 24×data only + modular slot |
| License | Network Advantage | Network Essentials | Network Advantage |
| PoE Budget | 370 W (single) / 740 W (dual) | 370 W (single) / 740 W (dual) | N/A |
| Switching Capacity | 128 Gbps full-duplex | 128 Gbps full-duplex | 128 Gbps full-duplex |
| Forwarding Rate | 95.23 Mpps | 95.23 Mpps | 95.23 Mpps |
| Stacking Bandwidth | 160 Gbps | 160 Gbps | 160 Gbps |
Specifications
| Parameter | Specification |
|---|---|
| Model | C9200-24P-A |
| Description | Catalyst 9200 24-port PoE+ Switch with Network Advantage license |
| Software | Cisco IOS XE with Network Advantage |
| Downlink Ports | 24×10/100/1000 RJ-45 PoE+ auto-sensing |
| Uplink Slot | 1× hot-swappable modular slot (4G/8X/2Q) |
| Switching Capacity | 128 Gbps full-duplex |
| Forwarding Rate | 95.23 Mpps (64-byte packets) |
| Stacking | StackWise-160; up to 8 members; 160 Gbps bidirectional bandwidth |
| Default Power Supply | 1× PWR-C6-600WAC (600 W AC, FRU-redundant) |
| Available PoE Power | 370 W (single PSU); 740 W (with secondary PSU) |
| DRAM / Flash | 4 GB DRAM; 4 GB flash |
| CPU & ASIC | Multicore x86 CPU; Cisco UADP 2.0 ASIC |
| MAC Address Table | 32,000 entries |
| IPv4 Routes | 14,000 (10,000 direct + 4,000 indirect) |
| IPv6 Routes | 2,000 |
| Multicast Routing | 1,000 groups |
| QoS Scale Entries | 1,000 |
| ACL Scale Entries | 1,600 |
| Packet Buffer | 6 MB buffers (Gigabit models) |
| Flexible NetFlow Entries | 16,000 flows |
| VLAN IDs | 4,096 |
| Total SVIs | 512 |
| Jumbo Frames | 9,198 bytes |
| Dimensions (HxWxD) | 1.73″×17.5″×13.8″ (4.4×44.5×35.0 cm) chassis-only |
| Weight | 11.02 lb (5.0 kg) |
| Operating Temp. / Humidity | 32 °F–113 °F (0 °C–45 °C); 5–90% RH non-condensing |
| Certifications & Compliance | UL/CSA 60950-1, CE, FCC Class A, RoHS, WEEE |
| Mean Time Between Failures (MTBF) | 422,310 hours |
More Details
Quality Certifications
Warranty
100% Low Price Guarantee
Network-switch.com provides high-quality products at low wholesale prices
100% Quality Assurance
All items are ORIGINAL and GENUINE only.
Item conditions are "New Sealed". They are fully tested by CCIE Engineers.
Free Technical Support
Our FREE Expert Consultancy Support is over the phone, by chat, by email or by login remotely.
100% Money Back Guarantee
You can contact our customer service team to exchange or return any product that you bought from us.
Flexible Secure Payment & Shipment
Verified authorization: Mcafee Secure, VeriSign Secured
Return Material Authorization (RMA) Process
Standard Warranty Policy
Original New Sealed Enterprise Hardware: 3 Years
Original New Sealed Consumer Devices: 1 Year
The Support Contacts
If your Cisco products failed, you must contact your sales representative to verify product failure. If the problem still can't correct by remote support methods i.e. email or phone support, the RMA procedure will issue.
常見問題與解答
退款政策
在 Network-switch.com我們致力於提供最佳的客戶體驗，確保您的購買符合您的期望。如果您因任何原因對購買的商品不滿意，請閱讀下方的退貨和退款政策，以了解您的選擇。
退貨
您有權退回從 Network-switch.com 在下列條件下：
- 退貨資格： 商品可於以下期限內退貨 30天 自交貨之日起，只要產品保持原始狀態、未使用且原包裝中。
- 不可退貨的商品： 某些商品（例如個人化或客製化產品）以及購買時標示為不可退貨的商品）無法退貨。
- 退貨流程： 如需退貨，請聯絡我們的客戶支援團隊 help@network-switch.com。我們將向您提供如何退回產品以及在必要時取得退貨授權號的說明。
退款
- 退款流程： 一旦我們收到您退回的商品並進行檢查，我們將在以下期限內按照原付款方式處理您的退款： 7個工作天。
- 退款條件： 退款將以商品購買價格計算，不包括任何運費、手續費或其他額外費用。如果退回的商品有損壞、使用過或缺少零件，我們可能會部分退款。
交流
如果您想更換不同尺寸、顏色或型號的商品，請遵循相同的退貨流程。收到退回的商品後，我們將根據庫存情況免費寄送替換商品。
運費
- 退貨運費： 除非物品有瑕疵、損壞或不正確，否則您有責任支付退貨運費。
- 運費退款： 運費不予退還，除非商品有瑕疵或不正確。
- 補貨費： 退回商品時將被收取約 30% 的產品價格，除非商品有瑕疵、損壞或不正確。
損壞或錯誤的物品
如果您收到損壞或錯誤的商品，請在規定時間內聯絡我們的客戶服務團隊 7天 收到產品後，我們將立即進行更換。
聯繫我們
如果您對退貨或退款有任何疑問或擔憂，請與我們聯絡：
電子郵件： help@network-switch.com
在退回任何產品之前，請聯絡我們，說明您遇到的問題。很多情況下，我們可以透過技術支援解決問題，您無需退回產品。
如果設備有無法修復的缺陷，您可以根據我們十二個月的保固期將其退還給我們進行維修或更換。只需聯絡我們，我們將為您提供退貨代碼、退貨地址以及其他說明。
請勿在未聯絡我們的情況下退貨。我們將引導您完成退貨流程，包括合適的配送方式。