https://network-switch.com
The Ruijie RG‑S5000 Series is a high-efficiency, cost-effective lineup of access network switches tailored for campus applications.
With a blend of 48-, 24-, and 10-port 1G models—some offering PoE/PoE+ and all featuring 2.5G uplinks—the series boosts performance beyond standard Gigabit and positions itself as a future-ready Ruijie network switch for schools, hospitals, offices, and wired/wireless campus networks.
Verified Model Specifications
| Model | RJ45 Ports | 2.5GE Uplinks (SFP) | PoE Support | Capacity / Forwarding | Buffer / CPU / Memory |
| 48GT4MS‑E | 48 × 1G | 4 | No | 139 Gbps / 104 Mpps | 512 KB buffer, 64 MB flash, 512 MB RAM |
| 24GT4MS‑E | 24 × 1G | 4 | No | 82 Gbps / 61 Mpps | |
| 24GT4MS‑P‑E | 24 × 1G | 4 | PoE/PoE+ | Same as non-PoE | – |
| 10GT2MS‑E | 10 × 1G | 2 | No | 36 Gbps / 27 Mpps | |
| 10GT2MS‑P‑E | 10 × 1G | 2 | PoE/PoE+ | Similar specs | – |
All models share:
- Layer 2+ features (static routing, RIP, VLAN, STP/MSTP);
- Surge protection: 10 kV per port, power port up to 6 kV common-mode;
- CPU Protection through proprietary CPP, defending against floods & attacks;
- RLDP (Rapid Link Detection Protocol) for loop and fiber fault detection;
- Energy savings via 802.3az EEE and smart fan control;
- O&M support via SNMP, syslog, Ruijie Onsite INC and WIS cloud suite.
Core Features & Differentiators
Higher-Speed Uplinks (2.5 Gbps)
All models offer multi-rate uplinks (1G/2.5G)—breaking previous gigabit bottlenecks and allowing seamless scaling to 10G fabrics.
Advanced Security & CPU Protection
The CPP mechanism (CPU Protection Policy) filters malicious or malformed packets destined to the CPU, ensuring stable and secure operation. Layer 2+ features include ACL, DHCP/ARP snooping, IP‑MAC‑Port binding, IGMP/MLD, and quality control.
RLDP & Surge Protection
RLDP detects unidirectional links and loops instantly, preventing network storms. Built-in 10 kV surge immunity safeguards access-layer ports.
Flexible Power Models (PoE versions)
P-Series switches carry PoE/PoE+, ideal for powering APs, VoIP phones, and IoT sensors with integrated management and protection.
Layer 2+ Protocol Suite
Supports VLANs (4k), QinQ, STP/RSTP/MSTP, ERPS, LACP, static routing, and RIP, fitting campus networks requiring both switching and basic routing.
Simplified O&M & Cloud Integration
Fully integrates with Ruijie Onsite INC and WIS platforms—enabling zero-touch deployment, ZERO configuration swap, batch firmware upgrades, and visualized network status.
Deployment Scenarios
High-Density Gigabit Access Layer
The 48GT4MS‑E serves sprawling office floors or classrooms with 48 Gb ports and high-speed uplinks, supporting up to 104 Mpps forwarding.
Mid-Level PoE for AP/CCTV
The 24GT4MS‑P‑E enables PoE/PoE+ for edge deployments—ideal for Wi-Fi 6 APs and PTZ cameras requiring simplified edge powering.
Compact Edge or Comm Room
10-port PoE and non‑PoE models fit compact racks in small offices or lab network closets with streamlined Ethernet access.
Campus Uplink Surge Handling
2.5G uplinks prepare the network for VoIP, HD camera streams, and eventual 10G adoption with minimal re-cabling.
Resilient Physical Edge
With RLDP and surge protection, the series is dependable in areas with fragile fibers or electrical exposure—such as outdoor wiring.
Deployment & Management Experience
- Quick provisioning via Onsite INC and Ruijie WIS, enabling plug-and-play onboarding.
- Hot-swap replacements allow swapping PoE and fiber modules without reconfiguration.
- Cloud-level view of network topology, alarms, and batch management.
- High sustainability: EEE and smart fans reduce operating costs.
- Robust uptime: CPU protection, loop prevention, ACL, and link redundancy elevate stability.
CLI Configuration Examples
Enable Web Management
Required to activate web GUI on S5000 series:
Ruijie# configure terminal
Ruijie(config)# enable service web-server
Ruijie(config)# enable service https-server
Configure VLAN & Static Routing
Ruijie(config)# vlan 10
Ruijie(config)# interface vlan10
Ruijie(config-if)# ip address 192.168.10.1 255.255.255.0
Ruijie(config)# ip route-static 0.0.0.0 0.0.0.0 192.168.1.254
Setup RLDP Monitoring
Ruijie(config)# rldp enable
Ruijie(config)# interface gigabitEthernet0/1
Ruijie(config-if)# rldp enable
Configure 2.5G Uplink Interface
Activates 2.5 Gbps uplink—supported across all S5000 uplink ports.
Ruijie(config)# interface gigabitEthernet1/0/1
Ruijie(config-if)# speed 2500
Conclusion
The Ruijie RG‑S5000 Series offers a powerful, secure, and scalable solution as a Campus Access Switch and Access network switch.
With multi-rate uplinks, PoE options, robust security, fast RLDP, energy efficiency, and rich L2+ features, this series is ready to underpin modern wired and wireless campus infrastructures with solid performance and simplified operations.
FAQ – Practical & User-Focused
Q1: Are PoE and non‑PoE models compatible in stacks?
Yes—PoE and non‑PoE units (e.g., 24GT4MS‑E with 24GT4MS‑P‑E) can co-exist in VSU clusters with centralized management.
Q2: How many can I stack via VSU?
Up to 9 units—4 recommended for best performance. Instant failover and unified control included.
Q3: What protection is built-in?
Ports have 10 kV surge protection; power modules enable 6 kV; RLDP and CPP ensure link and CPU safety.
Q4: Can it route between VLANs?
Yes—L2+ static and RIP routing are supported for simple gateway applications.
Q5: What makes it future‑proof?
2.5G uplinks remove bandwidth bottlenecks and pave the way towards 10G/40G/100G backbones.
Q6: Is it quiet and efficient?
Compact 1U format, intelligent fans (PoE/large port count models), and EEE contribute to low noise and power usage.
Did this article help you or not? Tell us on Facebook and LinkedIn . We’d love to hear from you!
