Get the Help and Supports!

This help center can answer your questions about customer services, products tech support, network issues.Select a topic to get started.

Ask Our Experts
Project Solutions & Tech.
Get Advice: Live Chat | +852-63593631

Ruijie RG‑S2910 Series – Gigabit Layer 2 Access Switches with 10G Uplinks & HPoE

Michael Tseng
Senior Engineer
https://network-switch.com

Hello, my name is Michael Tseng, and I am a Senior Engineer with the Technical Services team at network-switch.com. I am also a certified Cisco CCIE professional, which reflects my expertise in networking and my dedication to delivering high-quality technical solutions. I specialize in advanced network configurations, troubleshooting, and providing expert-level support to ensure seamless network operations.

The Ruijie RG‑S2910 Series brings next-gen performance to Layer‑2 access network switch deployments.

Models like RG‑S2910‑24GT4XS‑E, 48GT4XS‑E, 24GT4SFP‑UP‑H, and 24GT4XS‑UP‑H deliver gigabit access, optional 10G uplinks, PoE/HPoE support, modular local expansion, and advanced RGOS 11.X OS features — ideal for campus, branch, and SMB edge scenarios.

Model Overview & Specifications

Model Ports Uplinks Key Features
RG‑S2910‑24GT4XS‑E 24×1 Gb RJ45 4×1/10 G SFP+ Non‑PoE, fixed PSUs, EEE, VSU, RGOS11.X
RG‑S2910‑48GT4XS‑E 48×1 Gb RJ45 4×1/10 G SFP+ High density, same features above
RG‑S2910‑24GT4SFP‑UP‑H 24×1 Gb RJ45 4×1 G SFP, PoE/UP to H‑PoE Enhanced power (802.3af/at)
RG‑S2910‑24GT4XS‑UP‑H 24×1 Gb RJ45 4×1/10 G SFP+, H‑PoE High-power PoE+, modular redundancy

All switches share:

  • Switching capacity: 264 Gbps | Up to 132 Mpps forwarding.
  • Hardware: Fan case, modular PSUs (PoE models), robust VSU support, and RGOS11.X.

Core Features & Differentiators

Modular OS & Virtual Switch Unit (VSU)

Ruijie’s RGOS 11.X supports VSU, allowing up to 8 devices (recommended 4) to operate as a single virtual switch — unified CLI, IP, and seamless failover within 50–200 ms.

Energy Efficiency & Silent Operation

Up to 40% energy savings and 802.3az EEE, intelligent fan speed, and PoE idle-port shutdown reduce noise and OPEX.

Robust Layer‑2 Security

Supports port/MAC/IP binding, ARP/DHCP inspection, BPDU/IP-source guard, ACLs, DoS/DDOS protection, and “4 NeverDie” reliability technologies (NFPP, XCor, xSurge).

Rich Layer‑2 & Basic Layer‑3 Capabilities

VLANs (4K), QinQ, STP/RSTP/MSTP, RLDP, ERPS, REUP, link aggregation (LACP), IGMP v3/MLD snooping, ACLs, and hardware routing for static, RIP, and OSPF.

High Availability

Dual power modules (PoE versions), fan redundancy, hardware stacking via VSU, and fast protocol-based convergence deliver carrier-grade uptime.

SDN & Easy Management

OpenFlow 1.0/1.3 support, Ruijie Cloud / TR069 zero-touch provisioning, SNMPv1/2/3, sFlow, syslog, RMON, SSH, web GUI, Telnet, and modular expansion.

Deployment Scenarios

Gigabit Edge Access for Campus & SMB

Models like the 24GT4XS‑E and 48GT4XS‑E offer cost-effective gigabit distribution with future-ready 10G uplinks.

H‑PoE Powered Smart Buildings

The 24GT4SFP‑UP‑H & 24GT4XS‑UP‑H series provide IEEE802.3at/af and HPoE (802.3bt), ideal for powering wireless APs, cameras, and IoT at scale.

Scalable, High-Reliability Access Fabrics

VSU-enabled deployments ensure unified management and millisecond failover across multiple stacks, minimizing complexity.

Multi-Service Branch & Aggregation

Small offices can benefit from Layer‑2/3 routing (RIP/OSPF), DHCP relay, VLAN/QoS, and secure management options.

Secure IoT Corridor & Surveillance

With NFPP, ARP/DHCP inspection, BPDU protection, and multilayer VLAN separation, these access network switches deliver safe edge connectivity.

Deployment & Management Experience

  • Zero-Touch Provisioning (ZTP) via Ruijie Cloud / TR069 for fast deployment.
  • VSU stacking allows hot-add/remove of devices without downtime.
  • Power-saving and thermal control reduce OPEX; fanless options in some models guarantee silent operation.
  • Advanced monitoring, including SNMP, sFlow, RMON, and rich syslog, expedites troubleshooting.
  • Fixed-interface reliability, backed by PoE and system redundancy ensures sustained operations.

CLI Configuration Examples

Here are CLI snippets derived from Ruijie documentation and community posts—applied uniformly across RG‑S2910 models:

VLAN creation and interface assignment

Ruijie(config)# vlan batch 10 20

Ruijie(config)# interface vlan 10

Ruijie(config-if-Vlan10)# ip address 10.10.10.1 255.255.255.0

Ruijie(config-if-Vlan10)# quit

Trunk port with native VLAN

Ruijie(config)# interface gigabitEthernet0/1

Ruijie(config-if-GigabitEthernet0/1)# switchport mode trunk

Ruijie(config-if-GigabitEthernet0/1)# switchport trunk native vlan 10

Ruijie(config-if-GigabitEthernet0/1)# quit

LACP link aggregation

Ruijie(config)# interface range gigabitEthernet0/2-3

Ruijie(config-if-range)# port-group 1

Ruijie(config-if-range)# quit

Ruijie(config)# interface aggregateport 1

Ruijie(config-if-AggregatePort1)# switchport mode trunk

Ruijie(config-if-AggregatePort1)# quit

Enable SSH access

Ruijie(config)# enable service ssh-server

Ruijie(config)# crypto key generate dsa

Ruijie(config)# username admin password <pwd>

Ruijie(config)# line vty 0 4

Ruijie(config-line)# login local

PoE port configuration (UP models)

Ruijie(config)# interface gigabitEthernet0/10

Ruijie(config-if-GigabitEthernet0/10)# poe enable

Ruijie(config-if-GigabitEthernet0/10)# poe static 30

Conclusion

The Ruijie RG‑S2910 Series stands out as reliable access network switches, offering Gigabit edge connectivity, modular uplinks, HPoE support, robust Layer‑2/3 features, and high availability through VSU. With noise-conscious design and energy efficiency, these switches are excellent for campus networks, smart buildings, branch offices, and any environment demanding secure, scalable, and manageable network access infrastructure.

FAQ – User-Centric & Practical

Q1. Can the RG‑S2910 stack via VSU?
Yes—up to 8 units (recommended 4) can be managed as a single virtual switch.

Q2. Which models support HPoE (802.3at/bt)?
The RG‑S2910‑24GT4SFP‑UP‑H and 24GT4XS‑UP‑H support enhanced power for APs and cameras.

Q3. Is Layer‑3 routing available?
Yes—supports static, RIP, and OSPF v1/v2 routing capabilities.

Q4. How secure is the edge?
Features include ACLs, IP/MAC binding, ARP/DHCP snooping, BPDU/IP-source guard, and NFPP DDOS protection.

Q5. Are these switches energy-efficient?
Yes—they save ~40% power via EEE, auto-port power-down, and smart fan control.

Q6. What management options exist?
Supports SSH/Telnet/Web, SNMP v1/2/3, sFlow, RMON, syslog, and Ruijie Cloud provisioning.

Q7. Can I run SDN/OpenFlow?
Yes—OpenFlow 1.0/1.3 support enables SDN integration.

Did this article help you or not? Tell us on Facebook and LinkedIn . We’d love to hear from you!

Related posts
View all

Make Inquiry Today