https://network-switch.com
The Ruijie RG‑S5360 Series represents high-performance 10GE switches tailored for campus backbones and aggregation layers. With 24/48 gigabit downlinks, 4×1G/2.5G/10G uplinks, PoE+ options, hot-swappable dual power, RGOS 12.X modular OS, and industrial-grade protections.
The RG‑S5360 aligns as a top-tier Ruijie network switch for Campus, Enterprise, Aggregation, and high-capacity ethernet switch deployments.
Verified Model Specifications
| Model | 1G Ports | Uplinks | PoE Support | Switching Capacity / Forward Rate | Highlights |
| 24GT4XS‑E | 24×1G RJ45 | 4×1/2.5/10G SFP+ | No | 336 Gbps / 126 Mpps | Access-grade |
| 48GT4XS‑E | 48×1G RJ45 | 4×1/2.5/10G SFP+ | No | 704 Gbps / 528 Mpps | High-density |
| 24GT4XS‑P‑E | 24×1G RJ45 | 4×1/2.5/10G SFP+ | PoE/PoE+ | 336 Gbps / 126 Mpps | PoE access |
| 48GT4XS‑P‑E | 48×1G RJ45 | 4×1/2.5/10G SFP+ | PoE/PoE+ | 704 Gbps / 528 Mpps | PoE aggregation |
Common Features: Nano-coating, dual hot-swappable PSU, industrial temperature (–40 to 65 °C), 10 kV surge resistance, RGOS 12.X, and nano-eco efficiency .
Core Features & Differentiators
Multi-Gigabit Uplink Flexibility
Supports 1GbE, 2.5GbE, and 10GbE SFP+ uplinks—ideal for evolving backbone infrastructure without full migration to 10G.
VSU Clustering & System Resilience
Virtual Switch Unit (VSU) enables stacking of compatible switches for unified management, redundancy, and increased port capacity .
Robust Security Layers
ILER: IP Source Guard, DHCP/ARP inspection, ACLs, CPP & NFPP, IEEE 802.1X authentication—essential for secure campus edge and aggregation.
Advanced Layer‑2/3 Protocols
Full support for VLANs, STP/RSTP/MSTP, ERPS, OSPFv2/v3, VRRP, RIPng, BGP, IS-IS, BFD—allowing RG‑S5360 to act effectively as both Campus Switch and Enterprise Switch.
PoE/PoE+ Agility
PoE models deliver full IEEE 802.3af/at support, fulfilling outdoor surveillance, PoE camera, and AP power demands on gigabit access ports.
Eco-Friendly & Durable Design
Nano-coating protects against corrosive environments; efficient fans adapt speed to load, reducing noise and power draw.
Deployment Scenarios
Gigabit Access for Enterprise Floors
48-port RJ45 variants serve user workstations, phones, and APs, with uplinks to backbone via 10G.
PoE‑Powered Connectivity Zones
PoE models support high-density devices (wireless, cameras) with centralized power management—clean and practical.
Aggregation & Mini-Core Layer
Equipped with advanced routing and high throughput, RG‑S5360 fits well in aggregation pods or small core deployments.
Fiber-Wired Buildings or Labs
Use 24/48-port SFP+ models for 100% fiber device connectivity in labs or secure zones.
Rugged / Outdoor Antenna Hubs
Nano-coating and surge resilience make these switches suitable for roof-top AP or remote aggregation points.
Deployment & Management Experience
- Zero-touch onboarding via Ruijie INC and WIS—plug-and-play activation with automated IP assignment.
- Hot-swap PSU/fan modules ensure continuous operation during maintenance.
- Unified GUI/CLI and SNMPv3 simplify multi-site management.
- Rich telemetry (sFlow, RMON, SSH, TACACS+, Syslog) supports monitoring and analytics.
- Durable build and energy efficiency cut TCO while guaranteeing uptime.
Common CLI Configurations
Enable Secure Management (SSH/Web GUI)
enable
configure terminal
enable service ssh-server
crypto key generate rsa size 2048
enable service web-server
enable service https-server
Set Up VSU Virtual Stacking
vsu enable
vsu domain 1
Basic VLAN & Routing Configuration
vlan 100
interface vlan 100
ip address 10.100.100.1 255.255.255.0
ip route-static 0.0.0.0 0.0.0.0 10.100.100.254
10G Uplink Aggregation (LACP)
interface range tengigabitEthernet1/0/1-2
port-group 1 mode active
QoS Rate Limiting
qos car cir 50000 cbs 64000
interface gigabitEthernet0/10
qos car cir 20000
PoE Port Configuration (Applies to RG‑S5360‑24GT4XS‑P‑E & 48GT4XS‑P‑E)
interface gigabitEthernet0/1
poe enable
poe power-limit 30
poe priority low
Time-Based ACL with IPv6
acl ipv6 2000
rule 5 permit ipv6 source 2001:db8::/64 any
rule 10 deny ipv6 any any time-range WorkHours
time-range WorkHours
periodic weekdays 08:00 to 18:00
IGMP/MLD Multicast Configuration
igmp-snooping enable
ipv6 mld-snooping enable
interface gigabitEthernet0/1
igmp-snooping report-threshold 5
PoE Redundancy Setup (PoE models only)
power redundancy enable
Conclusion
The Ruijie RG‑S5360 Series delivers powerhouse performance as 10GE switches within Campus, Enterprise, and Aggregation environments.
Featuring high-density gigabit ports, flexible uplinks, PoE+ power, modular stacking, advanced routing, and durable industrial-grade design—all under a unified RGOS 12.X platform—this series stands as a future-proof network cornerstone.
FAQ – Real-World Guidance
Q1: Uplink speeds supported?
Yes—1G, 2.5G, and 10G SFP+ flexibly support multi-gig and future uplink needs.
Q2: PoE power limits?
Supports 802.3af/at with sufficient power budgets—24-port ~740 W; 48-port ~1440 W.
Q3: Can these stack with RG‑S5350?
Yes—both series share VSU; they operate under the same modular OS.
Q4: Suitable for harsh environments?
Series includes nano-coating, heat/surge resilience, suitable even for dirty coastal facilities.
Q5: IPv6 support?
Complete coverage: IPv6 routing, VRRPv3, OSPFv3, BGP with IPv6—fully IPv6-ready.
Did this article help you or not? Tell us on Facebook and LinkedIn . We’d love to hear from you!
