https://network-switch.com/pages/about-us
Introduction - The Short Answer
No - Cisco Catalyst 9300 stack kits and Cisco Catalyst 9300L stack kits are not compatible with each other. Although both series support stacking, they use different technologies, bandwidths, and physical connectors, preventing cross-model interoperability.
Mixing the wrong stack kits or cables will cause stack formation failures, inconsistent performance, or complete incompatibility between switches.
At Network-Switch.com, our certified engineers frequently help enterprise clients select the right stacking components to ensure stable deployment and avoid expensive compatibility issues.
Why Compatibility Matters?
Cisco Catalyst 9300 switches are among the most popular enterprise access and distribution platforms. However, Cisco offers several sub-models - 9300, 9300X, 9300L, and 9300LM, each designed for different performance tiers and physical architectures.
Because of that, not all stack kits or cables can be mixed, even within the same 9300 family.
Using the wrong kit (e.g., mixing STACK-T1 with STACK-T3 cables) can lead to:
- Stack negotiation failure (members cannot synchronize)
- Hardware damage to stack ports
- Reduced bandwidth or instability
- Non-operational stack after reboot
Proper kit selection ensures consistent bandwidth, hardware protection, and lifecycle support for your Cisco environment.
Cisco Catalyst 9300 Series Overview
The Cisco Catalyst 9300 family includes four main product lines, each using a specific stacking technology:
| Model | Uplink Type | Stacking Tech | Target Use |
| Catalyst 9300 | Modular uplink | StackWise-480 | Enterprise access/distribution |
| Catalyst 9300X | Modular uplink (new gen) | StackWise-1T | High-density / Wi-Fi 6E core |
| Catalyst 9300L | Fixed uplink | StackWise-320 | SMB / branch networks |
| Catalyst 9300LM | Fixed uplink (new gen) | StackWise-320 | Cost-optimized aggregation |
All models can stack up to 8 members within their series, forming a single logical switch with unified management and configuration. However, stacking compatibility exists only within the same stack technology family.
Modular Models - 9300 & 9300X (StackWise-480 / StackWise-1T)
The Catalyst 9300 and 9300X series are modular uplink models using high-performance StackWise technologies.
StackWise-480
- Used by Catalyst 9300 models
- Bandwidth: 480 Gbps per stack
- Cables: Cisco STACK-T1 (0.5 m, 1 m, 3 m)
- Max members: 8 switches
- Compatibility: Fully compatible among 9300s
StackWise-1T
- Used by Catalyst 9300X
- Bandwidth: 1 Tbps (industry-leading for enterprise stacking)
- Backward-compatible with 9300, but the entire stack runs at StackWise-480 speeds when mixed.
| Model | Stack Tech | Bandwidth | Compatible With | Stack Cable |
| 9300X | StackWise-1T | 1 Tbps | 9300 (at 480 Gbps) | STACK-T1 |
| 9300 | StackWise-480 | 480 Gbps | 9300X | STACK-T1 |
Mixing 9300 and 9300X is supported (speed downgrade to 480 Gbps).
Mixing 9300 or 9300X with 9300L/LM is not supported.
Tip: Always standardize StackWise cables (STACK-T1) across all modular switches to avoid misalignment in connector type and bandwidth negotiation.
Fixed Models - 9300L & 9300LM (StackWise-320)
The Catalyst 9300L and 9300LM models are fixed uplink variants designed for simplified deployment and cost-efficiency. They use a different stacking system - StackWise-320, providing up to 320 Gbps of bandwidth.
Stack Kits for 9300L/9300LM
Cisco provides two versions of stack kits for these models:
| Stack Kit | Cable Type | Connector Style | Compatible Models | Status |
| C9300L-STACK-KIT | STACK-T3 | Push-tab | Catalyst 9300L only | ⚠️ End-of-Sale (Nov 3, 2025) |
| C9300L-STACK-KIT2 | STACK-T3A | Thumb-screw | Catalyst 9300L & 9300LM | ✅ Active replacement |
Important:
- STACK-T3 and STACK-T3A cables have different connectors - they cannot be mixed in a single stack.
- When stacking mixed 9300L and 9300LM switches, all units must use KIT2 (STACK-T3A) to ensure compatibility.
| Model | Stack Tech | Bandwidth | Max Members | Internal Compatibility | Stack Kit |
| 9300L | StackWise-320 | 320 Gbps | 8 | 9300L / 9300LM | C9300L-STACK-KIT or KIT2 |
| 9300LM | StackWise-320 | 320 Gbps | 8 | 9300LM / 9300L | C9300L-STACK-KIT2 |
Network-Switch.com maintains inventory of both C9300L-STACK-KIT and KIT2 versions and can advise clients on upgrade paths if older kits reach End-of-Sale.
Compatibility Matrix (Simplified Visual Overview)
| Model | Stack Tech | Bandwidth | Compatible With | Cable / Kit | Mixed Stack Support |
| 9300X | StackWise-1T | 1 Tbps | 9300 (at 480 Gbps) | STACK-T1 | (Speed downgrade) |
| 9300 | StackWise-480 | 480 Gbps | 9300X | STACK-T1 | Yes |
| 9300L | StackWise-320 | 320 Gbps | 9300L / 9300LM | STACK-T3 / T3A | No |
| 9300LM | StackWise-320 | 320 Gbps | 9300LM / 9300L | STACK-T3A | No |
Visual rule of thumb:
- 9300 & 9300X → STACK-T1 cables only
- 9300L & 9300LM → STACK-T3 or T3A kits only
- Mixing across these groups = incompatibility
Key Takeaways - Design Rules Summary
No Mixed Stacking Between Modular and Fixed Uplink Models
- 9300 / 9300X use StackWise-480 or 1T
- 9300L / 9300LM use StackWise-320
→ Different connectors and firmware logic
Mixing 9300 and 9300X Is Supported (With Bandwidth Downgrade)
- Operates at StackWise-480 speed when combined.
High-Scale Models Stack Only with Like Models
- Certain 9300 SKUs (e.g., 9300-48UB) must stack with identical units.
Older Series Are Not Compatible
- Catalyst 3850 / 3650 cannot stack with 9300 series.
Stack Kits Must Match Across All Members
- STACK-T3 ≠ STACK-T3A; mixing results in failure to form stack.
Lifecycle Note
- C9300L-STACK-KIT reached End-of-Sale on November 3, 2025 → replaced by C9300L-STACK-KIT2.
Pro tip: Before deployment, confirm all switches have identical stack kit versions and compatible firmware. We provide pre-deployment testing and labeling for enterprise rollouts.
Common FAQs - Cisco 9300 Stack Kit Compatibility
Q1: Can I stack Catalyst 9300 and Catalyst 9300L switches together?
A: No. They use different stacking technologies and connectors (StackWise-480/1T vs StackWise-320).
Q2: Can I mix Catalyst 9300 and 9300X switches?
A: Yes. The stack will form successfully but operate at 480 Gbps (StackWise-480 speed).
Q3: What stack kit should I use for 9300LM?
A: Use C9300L-STACK-KIT2, which includes STACK-T3A cables.
This version supports both 9300L and 9300LM models.
Q4: Are STACK-T3 and STACK-T3A cables interchangeable?
A: No. They have different physical connectors.
To mix 9300L and 9300LM, you must upgrade all kits to STACK-T3A (KIT2).
Q5: What replaces the C9300L-STACK-KIT?
A: The C9300L-STACK-KIT (STACK-T3) reached End-of-Sale on Nov 3, 2025.
Cisco officially replaced it with C9300L-STACK-KIT2 (STACK-T3A).
Q6: What happens if I use an incompatible kit or cable?
A: Stack formation will fail - switches will boot as standalone units.
This can lead to unstable routing, redundant management IPs, and loss of redundancy.
Q7: Is the Cisco Catalyst 9300 a Layer 3 switch?
A: Yes. All 9300 models support Layer 2/3 switching, advanced routing protocols, and full StackWise redundancy features.
Still unsure which kit fits your network? Contact Network-Switch.com, our technical team can verify your model numbers, firmware versions, and deliver the correct stack kits with guaranteed compatibility.
Practical Design Tips for Cisco 9300 Stacking
1. Plan Your Stack Domain Early
Decide model groupings before hardware purchase.
→ Modular (9300/9300X) and Fixed (9300L/LM) models should never mix.
2. Label Your Stack Kits
During installation, label each kit with model type and cable version (T1 / T3 / T3A).
3. Keep Firmware Consistent
All stack members must run identical IOS-XE versions and license levels.
4. Consider Spare Kits
As Cisco retires older kits (like STACK-T3), stocking replacements such as KIT2 (STACK-T3A) ensures continuity.
5. Verify Post-Deployment
Use CLI commands:
to confirm all members are recognized and linked properly.
Choose the Right Kit for Reliable Stacking
Cisco Catalyst 9300 series switches deliver exceptional scalability and resiliency, but stack kit compatibility is critical to achieving those benefits.
- 9300 & 9300X share modular stacking via StackWise-480/1T (STACK-T1 cables).
- 9300L & 9300LM use fixed StackWise-320 (STACK-T3/T3A cables).
- Cross-family stacking (9300 ↔ 9300L) is not supported.
- Always match your stack kit version and cable type for stable operation.
At Network-Switch.com, we provide certified Cisco stack kits and tested NS Comm accessories, ensuring you deploy with full compatibility and confidence.
Explore our full range of Cisco 9300 Series stack kits and cables at Network-Switch.com - Genuine hardware, verified interoperability, and global after-sales support backed by certified engineers.
Did this article help you or not? Tell us on Facebook and LinkedIn . We’d love to hear from you!
