https://network-switch.com
The Ruijie RG‑S2910 Series brings next-gen performance to Layer‑2 access network switch deployments.
Models like RG‑S2910‑24GT4XS‑E, 48GT4XS‑E, 24GT4SFP‑UP‑H, and 24GT4XS‑UP‑H deliver gigabit access, optional 10G uplinks, PoE/HPoE support, modular local expansion, and advanced RGOS 11.X OS features — ideal for campus, branch, and SMB edge scenarios.
Model Overview & Specifications
| Model | Ports | Uplinks | Key Features |
| RG‑S2910‑24GT4XS‑E | 24×1 Gb RJ45 | 4×1/10 G SFP+ | Non‑PoE, fixed PSUs, EEE, VSU, RGOS11.X |
| RG‑S2910‑48GT4XS‑E | 48×1 Gb RJ45 | 4×1/10 G SFP+ | High density, same features above |
| RG‑S2910‑24GT4SFP‑UP‑H | 24×1 Gb RJ45 | 4×1 G SFP, PoE/UP to H‑PoE | Enhanced power (802.3af/at) |
| RG‑S2910‑24GT4XS‑UP‑H | 24×1 Gb RJ45 | 4×1/10 G SFP+, H‑PoE | High-power PoE+, modular redundancy |
All switches share:
- Switching capacity: 264 Gbps | Up to 132 Mpps forwarding.
- Hardware: Fan case, modular PSUs (PoE models), robust VSU support, and RGOS11.X.
Core Features & Differentiators
Modular OS & Virtual Switch Unit (VSU)
Ruijie’s RGOS 11.X supports VSU, allowing up to 8 devices (recommended 4) to operate as a single virtual switch — unified CLI, IP, and seamless failover within 50–200 ms.
Energy Efficiency & Silent Operation
Up to 40% energy savings and 802.3az EEE, intelligent fan speed, and PoE idle-port shutdown reduce noise and OPEX.
Robust Layer‑2 Security
Supports port/MAC/IP binding, ARP/DHCP inspection, BPDU/IP-source guard, ACLs, DoS/DDOS protection, and “4 NeverDie” reliability technologies (NFPP, XCor, xSurge).
Rich Layer‑2 & Basic Layer‑3 Capabilities
VLANs (4K), QinQ, STP/RSTP/MSTP, RLDP, ERPS, REUP, link aggregation (LACP), IGMP v3/MLD snooping, ACLs, and hardware routing for static, RIP, and OSPF.
High Availability
Dual power modules (PoE versions), fan redundancy, hardware stacking via VSU, and fast protocol-based convergence deliver carrier-grade uptime.
SDN & Easy Management
OpenFlow 1.0/1.3 support, Ruijie Cloud / TR069 zero-touch provisioning, SNMPv1/2/3, sFlow, syslog, RMON, SSH, web GUI, Telnet, and modular expansion.
Deployment Scenarios
Gigabit Edge Access for Campus & SMB
Models like the 24GT4XS‑E and 48GT4XS‑E offer cost-effective gigabit distribution with future-ready 10G uplinks.
H‑PoE Powered Smart Buildings
The 24GT4SFP‑UP‑H & 24GT4XS‑UP‑H series provide IEEE802.3at/af and HPoE (802.3bt), ideal for powering wireless APs, cameras, and IoT at scale.
Scalable, High-Reliability Access Fabrics
VSU-enabled deployments ensure unified management and millisecond failover across multiple stacks, minimizing complexity.
Multi-Service Branch & Aggregation
Small offices can benefit from Layer‑2/3 routing (RIP/OSPF), DHCP relay, VLAN/QoS, and secure management options.
Secure IoT Corridor & Surveillance
With NFPP, ARP/DHCP inspection, BPDU protection, and multilayer VLAN separation, these access network switches deliver safe edge connectivity.
Deployment & Management Experience
- Zero-Touch Provisioning (ZTP) via Ruijie Cloud / TR069 for fast deployment.
- VSU stacking allows hot-add/remove of devices without downtime.
- Power-saving and thermal control reduce OPEX; fanless options in some models guarantee silent operation.
- Advanced monitoring, including SNMP, sFlow, RMON, and rich syslog, expedites troubleshooting.
- Fixed-interface reliability, backed by PoE and system redundancy ensures sustained operations.
CLI Configuration Examples
Here are CLI snippets derived from Ruijie documentation and community posts—applied uniformly across RG‑S2910 models:
VLAN creation and interface assignment
Ruijie(config)# vlan batch 10 20
Ruijie(config)# interface vlan 10
Ruijie(config-if-Vlan10)# ip address 10.10.10.1 255.255.255.0
Ruijie(config-if-Vlan10)# quit
Trunk port with native VLAN
Ruijie(config)# interface gigabitEthernet0/1
Ruijie(config-if-GigabitEthernet0/1)# switchport mode trunk
Ruijie(config-if-GigabitEthernet0/1)# switchport trunk native vlan 10
Ruijie(config-if-GigabitEthernet0/1)# quit
LACP link aggregation
Ruijie(config)# interface range gigabitEthernet0/2-3
Ruijie(config-if-range)# port-group 1
Ruijie(config-if-range)# quit
Ruijie(config)# interface aggregateport 1
Ruijie(config-if-AggregatePort1)# switchport mode trunk
Ruijie(config-if-AggregatePort1)# quit
Enable SSH access
Ruijie(config)# enable service ssh-server
Ruijie(config)# crypto key generate dsa
Ruijie(config)# username admin password <pwd>
Ruijie(config)# line vty 0 4
Ruijie(config-line)# login local
PoE port configuration (UP models)
Ruijie(config)# interface gigabitEthernet0/10
Ruijie(config-if-GigabitEthernet0/10)# poe enable
Ruijie(config-if-GigabitEthernet0/10)# poe static 30
Conclusion
The Ruijie RG‑S2910 Series stands out as reliable access network switches, offering Gigabit edge connectivity, modular uplinks, HPoE support, robust Layer‑2/3 features, and high availability through VSU. With noise-conscious design and energy efficiency, these switches are excellent for campus networks, smart buildings, branch offices, and any environment demanding secure, scalable, and manageable network access infrastructure.
FAQ – User-Centric & Practical
Q1. Can the RG‑S2910 stack via VSU?
Yes—up to 8 units (recommended 4) can be managed as a single virtual switch.
Q2. Which models support HPoE (802.3at/bt)?
The RG‑S2910‑24GT4SFP‑UP‑H and 24GT4XS‑UP‑H support enhanced power for APs and cameras.
Q3. Is Layer‑3 routing available?
Yes—supports static, RIP, and OSPF v1/v2 routing capabilities.
Q4. How secure is the edge?
Features include ACLs, IP/MAC binding, ARP/DHCP snooping, BPDU/IP-source guard, and NFPP DDOS protection.
Q5. Are these switches energy-efficient?
Yes—they save ~40% power via EEE, auto-port power-down, and smart fan control.
Q6. What management options exist?
Supports SSH/Telnet/Web, SNMP v1/2/3, sFlow, RMON, syslog, and Ruijie Cloud provisioning.
Q7. Can I run SDN/OpenFlow?
Yes—OpenFlow 1.0/1.3 support enables SDN integration.
Did this article help you or not? Tell us on Facebook and LinkedIn . We’d love to hear from you!
