Cisco Industrial IE2000-8TC-G-E Rugged 8x10/100 +2x1G Combo Switch
保證安全結賬
安全、快速、100% 正品。您值得信賴的 IT 合作夥伴。
最佳價格保證、大量節省、全球信賴。
標籤點
Cisco IE2000-8TC-G-E Rugged LAN Base Switch
The Cisco® Industrial Ethernet 2000-8TC-G-E is a compact, ruggedized LAN Base switch engineered for demanding U.S. industrial networks—from Chicago transit control centers to Texas oilfields.
It delivers eight auto-sensing 10/100 Mbps RJ-45 downlink ports plus two 100/1000 Mbps combo SFP/RJ-45 uplinks in a fanless, convection-cooled chassis.
With dual-input DC power, alarm I/O and a DIN-rail mount, it combines enterprise-grade security and Cisco Resilient Ethernet Protocol (REP) for sub-second failover in harsh environments
Overview
Highlights
-
Ports & Uplinks
8 × 10/100 Mbps RJ-45 downlinks + 2 × 100/1000 Mbps combo SFP/RJ-45 uplinks in a single 10-port chassis. -
Compact Rugged Design
IP30-rated metal housing, fanless convection cooling, and extended –40 °C to +75 °C operating range for reliable performance in extreme U.S. facilities. -
Switching Performance
Up to 7.6 Gbps of switching bandwidth and a 3.8 Gbps forwarding bandwidth with wire-speed 5.66 Mpps packet handling. -
High Availability & Resiliency
Cisco REP ring protocol and Media Redundancy Protocol (MRP) deliver sub-second network failover for mission-critical applications. -
Enterprise-Grade Security
802.1X port-based authentication, DHCP snooping, Dynamic ARP Inspection, IP Source Guard, port security, SSHv2, SNMPv3, BPDU Guard, RADIUS/TACACS+. -
Flexible Management
Zero-touch express setup via DHCP, Web Device Manager, Cisco Catalyst Center, CLI, Telnet/HTTPS, SNMP, and USB/SD flash for rapid U.S. site provisioning. -
Industrial Protocol & Standards
EtherNet/IP, PROFINET, IEEE 1588v2 PTP for synchronized automation; UL/CSA 60950-1, EN 60950-1, CB IEC 60950-1, NEMA TS-2, Marine DNV, Substation KEMA, Railway EN 50155, IP30 certified.
Recommended Accessories
| Accessory | Category | Description |
|---|---|---|
| PWR-IE50W-AC= | Power Supply | 50 W AC/DC (100–240 VAC/1.25 A or 125–250 VDC/1.25 A); no PoE support |
| PWR-IE50W-AC-L= | Hazard-Location Power Supply | 50 W AC (100–240 VAC/1.2 A/50–60 Hz); IP20 rated for non-hazardous zones |
| SD-IE-1GB= | Removable Storage | 1 GB ruggedized SD memory card for configuration and firmware |
| STK-RACK-DINRAIL= | Mounting Hardware | 19″ DIN-rail mount kit for industrial racks and cabinets |
Comparison with Similar Models
| Feature | IE-2000-4TC-G-E | IE-2000-8TC-G-E | IE-2000-16TC-G-E |
|---|---|---|---|
| Ports & Uplinks | 4 × 10/100 RJ-45 + 2 × 100/1000 combo | 8 × 10/100 RJ-45 + 2 × 100/1000 combo | 16 × 10/100 RJ-45 + 2 × 100/1000 combo |
| Switching Capacity | 7.6 Gbps | 7.6 Gbps | 7.6 Gbps |
| Forwarding Rate | 5.66 Mpps | 5.66 Mpps | 5.66 Mpps |
| Power Consumption | 9.5–15 W | 12.5–20 W | 21–30 W |
| Operating Range | –40 °C to +75 °C; IP30 | –40 °C to +75 °C; IP30 | –40 °C to +75 °C; IP30 |
| Ideal Use Case | Compact I/O aggregation at remote sites | Mid-density industrial edge aggregation | High-density industrial backbone access |
Specifications
| Parameter | Specification |
|---|---|
| Product Code | IE-2000-8TC-G-E |
| Feature Set | Cisco IOS LAN Base |
| Downlink Ports | 8 × 10/100 Mbps RJ-45 |
| Uplink Interfaces | 2 × 100/1000 Mbps SFP/RJ-45 combo |
| Maximum Switching Bandwidth | 7.6 Gbps full-duplex |
| Maximum Forwarding Bandwidth | 3.8 Gbps |
| Forwarding Rate | 5.66 Mpps (64-byte packets) |
| Packet Buffer | 2 MB |
| MAC Address Table | 8,000 entries |
| VLANs | Up to 1,005 |
| NAT Entries | 128 translation entries |
| IPv4 / IPv6 Routes | 3,500 / 1,750 routes |
| DRAM / Flash / SD Card | 256 MB DRAM with ECC; 64 MB on-board Flash; optional 1 GB SD card |
| Alarm I/O | 2 dry-contact inputs; 1 Form-C output relay |
| Console Ports | Mini-USB and RS-232 RJ-45 |
| Power Input | Dual-input: 100–240 VAC/1.25 A or 125–250 VDC/1.25 A |
| Power Consumption | 12.5–20 W (excluding PoE) |
| Dimensions (H × W × D) | 5.1″ × 3.6″ × 5.26″ (130 × 91.4 × 134 mm) |
| Weight | 3.45 lb (1.56 kg) |
| Operating Temperature | –40 °C to +75 °C |
| Operating Humidity | 0–100% condensing |
| Certifications & Compliance | UL/CSA 60950-1, EN 60950-1, CB IEC 60950-1, NEMA TS-2, Marine DNV, Substation KEMA, Railway EN 50155, ISO 12944-6, IP30, EtherNet/IP, PROFINET |
More Details
Quality Certifications
Warranty
100% Low Price Guarantee
Network-switch.com provides high-quality products at low wholesale prices
100% Quality Assurance
All items are ORIGINAL and GENUINE only.
Item conditions are "New Sealed". They are fully tested by CCIE Engineers.
Free Technical Support
Our FREE Expert Consultancy Support is over the phone, by chat, by email or by login remotely.
100% Money Back Guarantee
You can contact our customer service team to exchange or return any product that you bought from us.
Flexible Secure Payment & Shipment
Verified authorization: Mcafee Secure, VeriSign Secured
Return Material Authorization (RMA) Process
Standard Warranty Policy
Original New Sealed Enterprise Hardware: 3 Years
Original New Sealed Consumer Devices: 1 Year
The Support Contacts
If your Cisco products failed, you must contact your sales representative to verify product failure. If the problem still can't correct by remote support methods i.e. email or phone support, the RMA procedure will issue.
常見問題與解答
退款政策
在 Network-switch.com我們致力於提供最佳的客戶體驗，確保您的購買符合您的期望。如果您因任何原因對購買的商品不滿意，請閱讀下方的退貨和退款政策，以了解您的選擇。
退貨
您有權退回從 Network-switch.com 在下列條件下：
- 退貨資格： 商品可於以下期限內退貨 30天 自交貨之日起，只要產品保持原始狀態、未使用且原包裝中。
- 不可退貨的商品： 某些商品（例如個人化或客製化產品）以及購買時標示為不可退貨的商品）無法退貨。
- 退貨流程： 如需退貨，請聯絡我們的客戶支援團隊 help@network-switch.com。我們將向您提供如何退回產品以及在必要時取得退貨授權號的說明。
退款
- 退款流程： 一旦我們收到您退回的商品並進行檢查，我們將在以下期限內按照原付款方式處理您的退款： 7個工作天。
- 退款條件： 退款將以商品購買價格計算，不包括任何運費、手續費或其他額外費用。如果退回的商品有損壞、使用過或缺少零件，我們可能會部分退款。
交流
如果您想更換不同尺寸、顏色或型號的商品，請遵循相同的退貨流程。收到退回的商品後，我們將根據庫存情況免費寄送替換商品。
運費
- 退貨運費： 除非物品有瑕疵、損壞或不正確，否則您有責任支付退貨運費。
- 運費退款： 運費不予退還，除非商品有瑕疵或不正確。
- 補貨費： 退回商品時將被收取約 30% 的產品價格，除非商品有瑕疵、損壞或不正確。
損壞或錯誤的物品
如果您收到損壞或錯誤的商品，請在規定時間內聯絡我們的客戶服務團隊 7天 收到產品後，我們將立即進行更換。
聯繫我們
如果您對退貨或退款有任何疑問或擔憂，請與我們聯絡：
電子郵件： help@network-switch.com
在退回任何產品之前，請聯絡我們，說明您遇到的問題。很多情況下，我們可以透過技術支援解決問題，您無需退回產品。
如果設備有無法修復的缺陷，您可以根據我們十二個月的保固期將其退還給我們進行維修或更換。只需聯絡我們，我們將為您提供退貨代碼、退貨地址以及其他說明。
請勿在未聯絡我們的情況下退貨。我們將引導您完成退貨流程，包括合適的配送方式。